3D printing materials German RepRap
Here you can compare the prices for 3D printing materials German RepRap, get acquainted with photos and technical characteristics (for example Ultraviolet (UV) post-cure required, Volume, Escape hole (min), Printing material, Build plate temperature, Extrusion temperature) and buy a liked model 3D printing materials in one of the reliable online stores.
-
Product catalogs to browse
-
Modular Hot-End, 3mm
The modular Hot-End is compatible with all extruders with a 16mm mount and designed for thermoplastic materials like ABS, PLA, HDPE, PP, PE etc. with a diameter of 3mm.
The advantage of the modular design is the simplicity of cleaning, maintenance and experiments. The nozzle can easily be changed without demounting the whole extruder. Cleaning or changing the nozzle takes only a couple of minutes.
The thermal barrier is made of PEEK and filled with a PTFE tube to reduce the friction and adhesion of material inside the barrier. It is possible to use ABS and PLA without problems.
This hot-end is used in our PRotos 3D-Printer and X400.
Contents:
Nozzle with 0,5mm bore
Heaterblock PEEK thermal barrier with PTFE tube, ready to mount
Nozzleholder for heater resistor
100k Thermistor
installation material (heat shrink tube, etc.)
The advantage of the modular design is the simplicity of cleaning, maintenance and experiments. The nozzle can easily be changed without demounting the whole extruder. Cleaning or changing the nozzle takes only a couple of minutes.
The thermal barrier is made of PEEK and filled with a PTFE tube to reduce the friction and adhesion of material inside the barrier. It is possible to use ABS and PLA without problems.
This hot-end is used in our PRotos 3D-Printer and X400.
Contents:
Nozzle with 0,5mm bore
Heaterblock PEEK thermal barrier with PTFE tube, ready to mount
Nozzleholder for heater resistor
100k Thermistor
installation material (heat shrink tube, etc.)
-
Payment Methods
We accept:
